Drag Car Racing Funny Crewneck Sweatshirts

Perfect Products began forming fiberglass hoods, scoops, and body panels in the early '60s as a white label supplier to other companies. By the late '60s, they had had started advertising direct sales in the various hot rod and drag racing magazines, selling via mail order though their catalog. Whether you needed a bolt on hood scoop or a one piece front clip, Akron, Ohio's Perfect Products was the best in the business.

It was Don Blair’s interest in racing the dry lakes that prompted him to opening a small business selling speed parts. If any business contributed to hot rodding in Southern California, it was Blair’s Speed Shop in Gardena where 25-year-old Don opened for business in 1946. From the early days of doing tune-ups and selling used parts to building legendary engines and complete funny cars, Don Blair left an indelible mark on the world of hot rodding.

Hurst floor-shifters were skillfully engineered, reliable and stirring in appearance, and their marketing was in tune with the times, catering to the flourishing muscle car movement of the 1960s. They were promoted through advertising, countless contests and other special programs that even included Hurst-sponsored giveaway cars.

Sorry Can't Drag Racing Bye Funny Racing

Our designs are set up for classic car enthusiasts and is in no way affiliated any car company or car manufacturer. Any brand names on tags are used for descriptive purposes only.

This World War II era airfield was located ten miles north of Green Cove Springs off of U. S. Highway 17 opened up in 1960. Drag races were held on the northern east-west asphalt runway of the Fleming Island Naval Outer Landing Field and was named after the Republic P-47 Thunderbolt aircraft that flew out of the base. The track was back-lit by two big WWII surplus searchlights that would go from idle to full light when the cars staged. Starting was by a liberated traffic light hanging across the track, so no Chrondek type tree here. Races were first every Sunday, but later in 1961, changed to the first and third Sunday.

Stock car racer Robert Newton wanted to design a tire compound to gain an advantage against fellow racers. This was done by retreading street tires in order to obtain a compound that would adequately gain enough traction. Using an abandoned barn in his home state of Indiana to start his business, he began sales to local racers, making him the first producer of specialty tires for competition use.

A black silhouette vintage racing car design which looks good in both dark and light colored-shirts, long sleeves and hoodies.

Founded in 1925, Mallory initially developed OEM ignition systems for many early cars, but by the '50s, they were known for their aftermarket systems for hot rods and drag racers who needed more oomph to get their high-compression engines to light and for those needing more adjustability for fine-tuning and keeping their monster motors humming along. Mighty Mallory was a fun superhero inspired character introduced in 1962 and was most commonly found on decals handed out at drag racing events.

retroracingshirt

R.A. and F.D. Stranahan are essentially the founders of Champion Spark Plug Company. Sort of. At the very least, they ended up with the patent on the Champion name which they legally and wisely used to eventually create the largest spark plug manufacturing company in the world. But it certainly didn’t start out that way. More than 20 thousand dollars in debt, and with a company that was fledgling along at best, the brothers had little choice but to move to Toledo when Willys-Overland Motor Company offered R.A. and F.D. a contract under which Champion would become the exclusive spark plug of automobiles manufactured at Willys-Overland. The deal came with the stipulation that the Stranahans must make Toledo their home.

Drag racing is the brand new motorsport and it's every Sunday at the Marine Corps Air Facility Santa Ana! Only 50 cents to get in! Open to sedans, coupe and roadsters.

This Pennsylvania-based performance legend started out as a maker of motor mounts for engine swaps and floor-shifters back in 1958, but they steadily expanded their product line through the 1960s. Hurst wheels, Line/Loc, and Swifter Shifter gloves were developed among other items, and later, Airheart Brakes and the Schiefer Manufacturing Company, which made clutches and other driveline components, were acquired. Hurst Performance floor-shifters were skillfully engineered, reliable and stirring in appearance, plus, their marketing was in tune with the times, catering to the flourishing muscle car movement of the 1960s. Their shifters infiltrated the drag racing, stock car racing, off-road racing and many other areas of motorsports.

As an avid dry lakes racer, Paul Schiefer developed his own clutches and flywheels that could take the abuse involved in propelling his racers to increasingly higher top speeds. He set up shop in 1947 and began manufacturing his clutches and flywheels for his fellow dry lakes enthusiasts and as word got out, his products became popular in other motorsports well. By 1956 Schiefer was mass-producing explosion-proof clutches which quickly became the clutch of choice for hardcore drag racers and by the mid-'60’s, the company had become the single largest manufacturer of specialty racing drive train components in the world.

Ask any knowledgeable blue oval enthusiast to name the quickest pure-production Mustang of the muscle car era, and most will say the 1968 Cobra Jet. It was packing a power plant based on the staid 428-cid big-car engine, but had larger valve heads and the race-brewed 427's intake manifold. It also had ram-air induction and a hood scoop that funneled air directly into a 735-cfm four-barrel carburetor. Output was an easy 410hp, but the factory rated it at 335hp in an effort to calm insurance agents and con drag strip rules-makers.

I Love Bracket Racing Drag Racing Cars

racing

drag racing

Funny Motorsport Racing Design that reads: "I Never Lose I Only Run Out Of Laps, Gas And Time". That's just right for a Race Car Driver who really enjoys Racing and Tuning Cars.

drag racing

I'll Be In My Office Drag Racing

Ask Me About Drag Racing

B&M came up with the idea of using a competition reinforced Hydramatic transmission for drag racing in the '50s and has been making performance automatic shifters, torque converters, shift kits, and transmission coolers ever since.

Speed-O-Motive got their start manufacturing custom pistons for flathead racing engines, but eventually began distributing speed parts and offering high-performance engine rebuild kits for pretty much every V8 application out there. If you couldn't swing by their Los Angeles area shop, you could mail order your parts, even complete engines after they begin offering turn key balanced and blueprinted crate racing engines. These crate strokers all ran Speed-O-Motive racing pistons, and the rest of the build leveraged top shelf goodies from other manufacturers.

Bro I'm Racing Funny Drag Racing

GO GO GO Dog Gone Racing! Hit the gas!

This funny auto racing t-shirt that reads Pit Lizards And Race Cars That's Why I'm Here is perfect for the person that loves going into the racing pits and watching race cars and girls! It's a great gift for anyone who loves race cars, auto racing, and girls. Whether you're a race car driver, mechanic, car lover, or just an enthusiast, this shirt is sure to make you smile.

Based in the town of Norphlet in Union County, Arkansas, Macmillan Oil Company began producing their Ring Free line of motor oils in 1923. The company was highly successful in promoting their products through sponsorships of motorsports ranging from flat track motorcycle racing and powerboats, to air racing and grand prix events, leveraging them to make their 'race proven' claims. Ring Free products continued to be popular throughout the '60s and '70s, but in as more high-tech formulas from new companies arrived in the '80s, Macmillan Oil Company's fortunes began to wane, and by the end of the decade, they had ceased operations.

Drag Racing Papa

If the words rally, drift, and v8 mean anything to you, then this awesome auto racing tshirt is just for you! This race car shirt makes the perfect gift or birthday present for any auto mechanic or car enthusiast who's into drag racing, rallying, stock car racing, sports car racing, or track racing.

Awesomeness by Evan Ferstenfeld and Carlos Rocafort IV.

Cool design for drag racing, mechanics and street racing lovers.

At the height of the muscle car era, Oldsmobile made a deal with Hurst that worked out really well for both companies. In order to create a “halo” car, the two companies collaborated to produce special, limited edition, high-performance Cutlasses. The program started in 1968 with a run of 515 cars, and continued off and on for a number of years, with the final run in 1984, but for many fans, the 1968, 1969, and 1972 versions were the best out of the nine years these cars were offered. The inspiration for the production cars was the Hurst Hairy Olds of 1966-67, drag cars that made a huge impact – twin-engine, four-wheel-drive monsters that were really fun to watch.

Somebody's Loud Mouth Drag Racing Mom

racing

Among the dealership-based supercar builders of the 1960s and ’70s — including Yenko, Nickey, Grand Spaulding Dodge, and Royal Pontiac, most of these dealerships of the muscle era offered what was known as a 'supercar' service, which essentially provided a brand new, stock-bodied vehicle with plenty of extra horses, using either a highly tuned factory power plant or a high-performance crate engine. Baldwin Chevrolet took a slightly different approach, taking new Chevys sold through is dealership in Baldwin, New York (Long Island), and then delivered them to Joel Rosen’s Motion Performance speed shop (also in Baldwin), where they became street-legal, turn-key drag cars. many of which had optional wild custom body kits